Temu MY002 – Product Liability Lawyer

2026-03-17 – A consumer has reported to the CPSC SaferProducts.gov database that an infant nearly drowned after slipping from a Temu MY002 infant bath seat, manufactured by Yuyao Wanze Plastic Industry Co., Ltd. The incident, which occurred on 2026-02-24, highlights a potential drowning hazard associated with the product. The report (ID 5919338) describes a locking mechanism failure that allowed the child to slip out of the seat during use.

Product Details

Brand Name: Temu
Manufacturer: Yuyao Wanze Plastic Industry Co., Ltd
Model: MY002
Incident Report Number: 5919338
Severity Type Name: Hospital Admission
Source URL: https://www.saferproducts.gov/PublicSearch/Detail?ReportId=5919338

Incident Overview

According to the incident report filed with the CPSC SaferProducts.gov database on 2026-03-17, the event occurred on 2026-02-24. A parent placed their child in the Temu MY002 infant bath seat, which was being used as intended. The child slipped out of the seat due to a defective locking mechanism, resulting in a near-drowning incident. The child was subsequently admitted to a hospital for evaluation and treatment.

The reporter stated that the locking mechanism disengaged unexpectedly, allowing the child to slide out of the seat. The product was reportedly used according to the manufacturer's instructions, and the reporter retained the product and packaging. No prior issues with the seat were mentioned in the report. The severity of the incident was classified as a hospital admission, indicating that the child required medical attention.

Safety Concerns

Immediate Dangers: When the locking mechanism disengages unexpectedly, the infant can slip out of the bath seat and into the water. Even a few seconds of submersion can lead to drowning, brain damage, or death. The failure described in the CPSC report (ID 5919338) directly exposes the child to this life-threatening risk.

Who Might Be Affected: Infants and young children who cannot support themselves or sit upright independently are at greatest risk. Parents or caregivers who rely on the bath seat to keep the child secure during bathing may be unaware of the locking mechanism's potential to fail.

Warning Signs: There may be no visible warning before the locking mechanism fails. The product may appear intact and function normally during initial uses. However, any looseness, clicking sounds, or difficulty latching the seat should be considered potential indicators of a defect.

Environmental Triggers: Water, soap, and bath products may affect the locking mechanism over time, potentially causing corrosion or wear that compromises its ability to hold. Repeated use and exposure to moisture could accelerate the failure of plastic components.

What Our Clients Say

What Consumers Should Do

Stop Using Immediately: If you own a Temu MY002 infant bath seat, discontinue use immediately. Do not rely on the locking mechanism to keep your child safe.

Preserve the Product: Keep the bath seat, packaging, and any receipts or documentation in a safe place. Preserving the evidence is important for any future investigation or legal action.

Document the Incident: If your child experienced a similar incident, take photos of the product and write down the date, time, and details of what happened. Keep medical records if medical attention was sought.

Seek Medical Attention: If your child was submerged or experienced a near-drowning, seek immediate medical evaluation even if the child appears fine. Some symptoms, such as breathing difficulties, can develop hours later.

Report to the CPSC: File a report on SaferProducts.gov (www.saferproducts.gov) to help regulators identify dangerous products and protect other families.

Check for Recalls: As of this writing, no public recall has been issued for the Temu MY002. Monitor CPSC.gov for updates from Yuyao Wanze Plastic Industry Co., Ltd regarding the MY002 model.

If you or your child suffered injury or property damage from this product, you may wish to speak with a product liability attorney to discuss your legal options.

Manufacturer's Response

The manufacturer's official response to this specific incident report is not publicly available at the time of this writing. No recall has been announced for the Temu MY002 infant bath seat by Yuyao Wanze Plastic Industry Co., Ltd.

Legal Help Available

H Law Group is a California-based law firm representing individuals injured by defective products. We handle product liability cases on a contingency fee basis, meaning you pay nothing unless we recover compensation for you. Our team offers free consultations to discuss your case and explain your legal rights. If you or a loved one was injured by Temu MY002 or a similar product, contact H Law Group at (888) 499-4948 for a free, no-obligation consultation.